6 PerspeX SB

The 6 PerspeX SB's perimeter drive-belt mechanism was inspired by the introduction of the RPM 10 Carbon turntable, which uses a fully-decoupled motor. With the 6 Perspex SB, the motor sits within its own cut-out inside the main plinth, lined with damping material for reduced resonance. The motor itself is an AC design, which is regulated by its own built-in speed controller. This speed controller not only offers easy switching between 33 and 45rpm, but it also generates an entirely fresh new sine wave for the motor – filtering out the fluctuations and distortions associated with a typical mains supply, for reduced resonance.

The 6 Perspex SB stands out as a beautifully engineered machine thanks to the pristine acrylic plinth, which is accented by the striking sub-chassis, platter and TPE-damped aluminium coned feet, as well as the new motor.

The turntable’s sub-chassis is made of Corian®, a solid-surface material renowned for its isolation properties. This sub-chassis is then isolated from the main plinth by magnetic power, effectively creating a “floating” platform free from unwanted vibrations. The precision-balanced vinyl sandwich platter rides on the sub-chassis utilising an inverted main bearing, which combines a stainless-steel axle with a ceramic ball. The platter’s 4mm thick vinyl top-layer is the perfect interface for a playing record, and eliminates the need for any form of turntable mat, which can have a detrimental effect on the sound performance of high-end turntables. The platter is finished with a threaded spindle, to accommodate the supplied screw-able record clamp.

The 6 Perspex SB is finished with Pro-Ject’s coveted 9CC Evolution tonearm for a true high-end experience. The 9” tonearm boasts a one-piece conical carbon fibre tube, TPE-damped counterweights and an inverted bearing design that allows for perfect tracking and minimal resonance, even with demanding pick-up cartridges. 

Henley Audio also offer a special cartridge bundle service so you can get a matching Pro-Ject or Ortofon Moving Coil cartridge for up-to 30% off (read our FAQ).

The 6 Perspex SB is the complete audiophile turntable, but at a very appealing price. A top grade phono cable is supplied in the way of the Connect-IT E (123cm) and a protective dust cover tops off this incredible package.

Upgrade Your Tonearm

The tonearm is one of the most important parts of a turntable and therefore not only influences, but also shapes the sound in a specific way.

The all-new EVO and EVO premium tonearm ranges are the result of Pro-Ject's work from the last years, and they are proud to also offer new finishes and many additional improvements.

To learn more about the EVO and EVO premium tonearm ranges, head here.

True Balanced Connections

The interconnect cable between a record player and a phono stage is prone to pick up noise on the way. That noise and interference can stem from a lot of unavoidable sources, such as household applicances, wi-fi and bluetooth devices, other power cables and audio amplifiers. Unshielded (i.e. RCA) interconnects can amplify the picked-up noise and make it audible through your speakers, interfering with the pure musical signal.

Balanced (typically XLR) cable connections double the wires carrying the musical signal – with one side inverted. In this case noise still gets picked up by both wires, but with one side reversed. When the signals are re-joined at the phono stage, the picked-up noise is cancelled out by the opposing signals. The benefit of this is a louder, cleaner musical signal that has doubled in size with almost no remaining noise.